Molecularly imprinted polymer based quartz crystal microbalance sensor system for sensitive and label-free detection of synthetic cannabinoids in urine.
D. Battal, Semra Akgönüllü, M. Yalçin, H. Yavuz, A. Deni̇zli̇
- Yazarlar
- D. Battal, Semra Akgönüllü, M. Yalçin, H. Yavuz, A. Deni̇zli̇
- Yayın
- Biosensors & bioelectronics 2018
- DOI
- 10.1016/j.bios.2018.03.055
- Atıflar
- 79
Özet
Herein, we prepared a novel quartz crystal microbalance (QCM) sensor for synthetic cannabinoids (JWH-073, JWH-073 butanoic acid, JWH-018 and JWH-018 pentanoic acid,) detection. Firstly, the synthetic cannabinoid (SCs) imprinted (MIP) and non-imprinted (NIP) nanoparticles were synthesized by mini-emulsion polymerization system. The SCs-imprinted nanoparticles were first characterized by SEM, TEM, zeta-size and FTIR-ATR analysis and then were dropped onto the gold QCM surface. The SCs-imprinted QCM sensor was characterized by an ellipsometer, contact angle, and AFM. The limit of detection was found as 0.3, 0.45, 0.4, 0.2 pg/mL JWH-018, JWH-073, JWH-018 pentanoic acid and JWH-073 butanoic acid, respectively. The selectivity of the SCs-imprinted QCM sensor was shown by using JWH-018, JWH-018 pentanoic acid, JWH-073 and JWH-073 butanoic acid. According to the results, the SCs-imprinted QCM sensors show highly selective and sensitive in a broad range of synthetic cannabinoid concentrations (0.0005-1.0 ng/mL) in both aqueous and synthetic urine solutions.
Bu makaleye atıf yapın
D. Battal, Semra Akgönüllü, M. Yalçin, H. Yavuz, A. Deni̇zli̇ (2018). Molecularly imprinted polymer based quartz crystal microbalance sensor system for sensitive and label-free detection of synthetic cannabinoids in urine.. Biosensors & bioelectronics. https://doi.org/10.1016/j.bios.2018.03.055
BibTeX
@article{d2018,
title = {Molecularly imprinted polymer based quartz crystal microbalance sensor system for sensitive and label-free detection of synthetic cannabinoids in urine.},
author = {D. Battal and Semra Akgönüllü and M. Yalçin and H. Yavuz and A. Deni̇zli̇},
journal = {Biosensors & bioelectronics},
doi = {10.1016/j.bios.2018.03.055},
year = {2018}
}